Combine / Boolean

Carve restoration

The main job of this box: the restoration is made from a shape to copy (a pre-op scan, a wax-up or, where offered, the AI virtual pre-op) minus the prepared arch, trimmed at the finish line. No margins to draw.

  1. Choose the Shape to copy and the Prepared arch. When the model roles are set, they are filled in for you.
  2. Relief (spacer) is the space left on the inside, 100 µm to start (0 to 500). Close contacts makes copied crowns touch their neighbours at 20 µm; switch it off to keep the pre-op contacts. Advanced holds the Finish-line trim (0.5 mm to start).
  3. Press Carve restoration. Cancel calculation stops it; the input models never change.