Edit Tools

Polyline

Cuts through the model along an outline you draw on the screen. Everything inside the outline is selected, on every visible model, front and back. A result of Combine / Boolean is cut at once, with no Confirm.

Shows the Polyline tool: left-click and hold on the model, drag around the area to affect, then right-click to finish. The outlined area can be deleted, or after Undo the selection can be inverted to delete everything outside it instead.

  1. Click points around the area, or drag a freehand loop. Double-click, or press Close loop, to close it.
  2. Press Delete to remove the selection. To keep only the outlined area, press Invert Selected Area first. Clear empties the selection.
  3. Press Confirm to keep the cut, or Cancel to get the original model back.

Brush

Trims by painting: drag over the area to remove. Only the surface you see is cut, never the side behind it. Choose Small, Medium or Large. Each stroke is cut when you let go; Confirm keeps the cuts, Cancel gets the original model back.

Shows the Brush tool in small, medium and large sizes: left-click and drag, and whatever it touches is cut away. The dentist shows using a small Brush along the flanges of a scanned denture to separate the intaglio from the cameo, which gives a tissue scan.

Remove Island

Removes a loose piece that is not joined to the rest of the scan: click it. If it is still attached, cut it free with Brush or Polyline first. Confirm keeps the change, Cancel gets the original model back.

Shows Remove Island: click a piece of the model that is not connected to the rest and it is removed. A piece can first be cut free with the Brush, then removed the same way; Confirm finishes the edit.

Fill Hole

Fills holes in a scan with a patch flush with the surface around it. The outer edge of a scan and an opening on the margin line are never filled. Holes inside a margin line on the prepared tooth are filled for you, with one Undo.

Shows Fill Hole for holes in a model, on the preparation or elsewhere, that could affect the final design. You set the perimeter of the holes it can fill and the fill colors, and it closes each hole in the matching color, tooth color on teeth and gum tissue on the gingiva. The dentist notes it is useful for advanced work, particularly printing.

  1. Set the Maximum Perimeter of a Hole with the slider or the box (1 to 500 mm, 50 to start). Every hole up to that size is outlined in yellow, and the count shows below.
  2. Press the check mark to fill every outlined hole, or click one hole on the model to fill only that one. Each fill has its own Undo.
  3. Use Neighboring Colors for Filled Holes blends each patch with the colours around it; switch it off for a plain patch. Done leaves the tool.

Plane Cut

Cuts every visible model the planes pass through into separate pieces, along one or more flat planes. Each new piece shows in its own colour. Use the boxes above the eye icons to choose which models are cut; to cut only one model, hide the others. Undo restores the originals.

Shows Plane Cut, which slices any model in any direction: add a plane with the plus sign, place it, move and tilt it, then cut. The result is the original model plus the sliced models, and the dentist points out that where the cut is made matters for advanced work.

  1. Click the model where the cut should go. A plane is placed there, upright on the screen.
  2. Move or Tilt the plane with its handles. + adds another plane; − removes the selected one.
  3. Press Cut. The pieces become separate models and the originals are hidden; Undo brings them back.

Transform

Moves, turns and scales one model. Click the model to transform; click another model to switch. Moving a model changes how it sits against the others.

Explains the Transform tool, which moves and rotates one model and breaks its relationship with the other scans from the intraoral scanner. The dentist warns it is risky for users new to digital or CAD and useful for experienced users, especially in implantology; in the example the maxilla is moved away from the mandible, pre-op and buccal bite, and Fix to New Position keeps the change. If a restoration has already been designed on the model, Transform does not move the original: it makes a duplicate with new coordinates and a new file name, so the relationship to the result is kept.

  1. Choose Move + Rotate, Move, Rotate or Scale, then drag the handles in the view. Drag moves; Ctrl + drag turns.
  2. Scale: Uniform takes one percentage, Per axis one for each of X, Y and Z. The size in mm updates as you go, and each change has its own Undo.
  3. Mirror left ↔ right mirrors the model to the other side, for example a 35 into a 45. On a master tooth, Snap to margin & path of draw fits it onto its margin.