Check my setup
About 10 seconds. Runs in your browser; nothing about your computer is sent to us.
Pricing
How much does it cost?
Designing is free. You pay only to save or export a design you changed. Single restorations: $1.50 for the first, each one after it 10% less (14 units = $11.57). Full-arch splinted temporary $1.50, nightguard $2.00, Boolean temporary $5.00 per arch. Denture Dupe (denture duplication): free during beta (in validation, not for clinical use). See the full price sheet: click Pricing at the bottom of the page, next to FAQ.
When do I pay?
In Manufacture, after you approve the design and choose Download / Print, Mill or Send to Lab. The running total shows in the left column while you design.
Do I pay again to download the same design?
No. Unchanged models and designs you already paid for download free. Any change makes a new version to pay for.
What does milling cost?
Standard STL Output $1.50; without compensation +$1.50; with compensation +$1.50; least material removed +$3.00. Prices are for the first restoration; each one after it is 10% less.
Can I prepay?
Yes, with credit packs: pay $25.00, get $27.50; pay $50.00, get $60.00; pay $100.00, get $130.00. Prices are subject to change. Credit you already bought keeps the prices it was bought under until it runs out.
Computer and browser
What computer do I need?
Minimum: a computer from the last 5 years with 8 GB of memory and a 4-core processor. Recommended: 16 GB of memory, 8 or more processor threads, and a separate graphics card (NVIDIA or AMD) or a recent Apple M-series Mac. Click "Check my setup" above to test yours.
Which browser should I use?
The latest Google Chrome or Microsoft Edge. Safari and Firefox work but are less tested. To update: browser menu → Help → About, then restart the browser.
How do I turn on hardware acceleration?
Chrome or Edge: menu → Settings → System → turn on "Use graphics acceleration when available", then restart the browser. "Check my setup" shows whether it is on.
How do I update my graphics driver?
Windows: run Windows Update, then the updater from your graphics maker (NVIDIA, AMD or Intel). Mac: System Settings → Software Update. Restart the computer afterward.
Internet
How fast should my internet be?
Recommended: 25 Mbps download and 10 Mbps upload or faster. Upload speed matters most, because scans are sent from your computer. You can test at fast.com or with "Check my setup".
Wi-Fi or cable?
A network cable is faster and steadier. On Wi-Fi, sit in the same room as the router and avoid busy times (video calls, backups).
What does slow internet look like?
Uploads and "opening case" take minutes instead of seconds, designs wait to start, or saving shows a "waiting for a connection" note.
What should I try when the internet is slow?
1. Restart the router: unplug it for 30 seconds, then plug it back in. 2. Pause large downloads, backups and video on other devices. 3. Use a network cable. 4. If fast.com is still slow, call your internet provider and ask them to check the line and update the router software (firmware).
Slow, laggy or frozen
The page is slow or laggy.
1. Close other browser tabs and programs. 2. Plug in your laptop; on battery it slows down. 3. Make sure hardware acceleration is on (see above). 4. Update your graphics driver. 5. Reload the page; your work is saved.
The model spins or zooms out of control.
Let go of the mouse and wait a second; the view catches up when the computer is busy. Close other programs. A mouse with a scroll wheel is easier to control than a touchpad.
The model looks too dark or too bright.
Open Customize (bottom left) → Brightness, and adjust Model brightness. Reset Brightness & Contrast puts it back.
It looks stuck. Did it crash?
A spinning hourglass means work is still running; large scans and designs can take a minute or two. Please wait for it to finish.
What is the "new version is being deployed" banner?
We are putting out an update. Wait until the banner goes away (usually a few minutes) before starting a design. Your saved work is kept.
An error box appeared.
Read the message, then try again. If it keeps happening, reload the page (your work is saved) and report it (see below).
Files
Which files can I use?
STL, PLY, OBJ and XYZ scan files, or a ZIP exported from your scanner (Medit, SHINING 3D, 3Shape).
How big can files be?
A single arch scan is usually 5–50 MB. One import can hold up to 250 MB in total. Colored PLY/OBJ files are larger than STL.
My scan is very large or slow to open.
1. Export only the models you need (for example, upper, lower and bite). 2. Export STL instead of colored files if you don't need color. 3. Use a network cable while uploading. 4. Close other tabs while it loads.
Saving and privacy
Where is my work saved?
Your work saves automatically as you go. A recovery copy is also kept in this browser, so work comes back if the browser closes unexpectedly. Patient names and your own model names stay only in this browser, on this computer.
Can I clear my browser cache?
Clearing "cookies and site data" for this site removes the names and recovery copies kept in this browser. Clear only "cached images and files" if a support person asks you to.
Is this ready for patient cases?
This is a beta. Use demo cases or cases with no patient details, and don't put patient names in file names. Designs must be reviewed by a qualified professional.
Getting help
How do I report a problem?
1. Click "Check my setup", then "Copy results". 2. Click Record (right column), reproduce the problem, then stop the recording. 3. Click Send to Viewer and copy the link. 4. Email us the results, what you clicked, and the link. Don't include patient information.
Where are the how-to videos?
Click Tutorials (bottom left). They show every step, from importing scans to manufacturing.