Walks through a night guard design from start to finish. It begins with labeling the models correctly and explains why the bite should be captured in the open position, so the guard does not need grinding at delivery. The software finds the height of contour, closes holes in the scan and proposes the border, which you can raise or lower; undercuts can be blocked out with the Form tool before the path of draw is set. You then generate a flat plane or Michigan splint, adjust its thickness and complete it, and from the same screen you can go on to Model Maker or other designs on the same case.

A night guard is designed on the working arch of an arch prescription. Open it from Arch Designs › Night Guard; in an arch case, Axis / Spacer and Design open it too. The Nightguard panel has three steps: border, path of draw, guard design.

1. Border

  • Find border automaticallyPlaces the border along the height of contour of the working teeth, on the current path of draw, never on the gum.
  • Raise / lower border (mm)Moves the whole border up or down; Reset to 0 puts it back.
  • Import XYZ borderLoads a saved border. Or click on the working arch to draw one; drag a node to move it, click the line to add one, select one and press Delete to remove it; Ctrl+Z or a right-click undoes. Close border (or a double-click) closes it.
  • Next: Path of drawAvailable once the border is closed.

2. Path of draw

  • SuggestProposes the direction with the least undercut under the border. Drag the blue arrow tip to change it; blue on the teeth is undercut, which the guard blocks out.
  • From viewUses the direction you are looking from.
  • ReverseTurns the direction the other way.

3. Guard design

  • Flat planeA flat-plane guard. Michigan (needs the opposing arch) adds an anterior guidance ramp so the back teeth come off in forward and side movements.
  • Thickness limitsMin occlusal thickness 1.5 mm (0.5 to 3; a warning below 1.5), Max 3 mm (1 to 6, only a guide), buccal / lingual wall 1 mm (0.5 to 3), spacer / internal relief 100 µm (0 to 500).
  • Follow the biteWith an opposing arch: the biting surface touches all the opposing teeth and its thickness follows the bite. Flat: one flat plane at the bite, touching the closest opposing teeth.
  • Generate guardBuilds the guard and paints where the opposing teeth hit it, in the contact colours. Generate another version keeps the earlier one in Results.
  • CompleteAdds the guard and its blocked-out model to Results. Form, Subtract, Smooth and Move Wall in Design Tools can still shape the guard.